Loading the Glue Applicator Gun: Step 1 / Loading the cartridge Insert the 210ml Glue cartridge into dispensing applicator. Unsrew the collar, remove the nose plug and discard. Step 2 / Clip the tip on to the tube of glue and hold in place by placing the collar back over the tip and screw down tightly.
Hold both vertically to let air bubbles rise to the top. Then squeeze handle to push both blue and yellow components through mixing tip to create a steady flow of solid green. This should eject any air bubbles that may cause mixing problems. This will visually insure a perfect mix. Always discard a small amount before each application, unmixed colours will contaminate bonding surface.
Your Glue is now ready to use.